Wall Light Installation

Step 1: Prepare the Wall

Choose your desired mounting location.

Hardwired version: Ensure power is switched off.

Locate the junction box and expose the live, neutral, and ground wires.

Wireless version: No wiring required - skip this step.

Step 2: Position the Mounting Bracket

Place the included metal bracket over your chosen spot (or junction box for hardwired). Align with drilled holes.

Step 3: Secure the Bracket

Use the provided screws to firmly fasten the bracket to the wall. This serves as the anchor for the fixture.

Step 4: Electrical Connection

Hardwired version: Connect the fixture wires to the junction box (live to live, neutral to neutral, ground to ground). Tighten each connection securely.

Wireless version: Not applicable - skip this step.

Step 5: Mount the Fixture

Align the fixture with the installed bracket. Slide it into place until flush with the wall.

Step 6: Final Fastening

Insert the top locking screw and tighten until the fixture is secure.

Step 7: Power On

Hardwired version: Restore power at the breaker.

Wireless version: Ensure the battery is charged, then switch the light on using the built-in control.

Notes:

- A detailed installation guide is included in every package.

- Professional installation is recommended for the hardwired version if you are not experienced with electrical work.

- Always follow local electrical codes and safety guidelines (hardwired only).

- For wireless versions, fully charge the battery before first use.